 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD74LV1G125A Bus Buffer Gate with 3-state Output REJ03D0071-0700 Rev.7.00 Mar 21, 2008 Description The HD74LV1G125A has a bus buffer gate with 3-state output in a 5 pin package. Output is disabled when the associated output enable (OE) input is high. To ensure the high impedance state during power up or power down, OE should be connected to VCC through a pull-down resistor; the minimum value of the resistor is determined by the current sourcing capability of the driver. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features * The basic gate function is lined up as Renesas uni logic series. * Supplied on emboss taping for high-speed automatic mounting. * Electrical characteristics equivalent to the HD74LV125A Supply voltage range : 1.65 to 5.5 V Operating temperature range : -40 to +85C * All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V, Output : Z) * Output current 6 mA (@VCC = 3.0 V to 3.6 V), 12 mA (@VCC = 4.5 V to 5.5 V) * All the logical input has hysteresis voltage for the slow transition. * Ordering Information Part Name HD74LV1G125ACME HD74LV1G125AVSE Note: Package Type CMPAK-5 pin VSON-5 pin Package Code (Previous Code) PTSP0005ZC-A (CMPAK-5V) PUSN0005KA-A (TNP-5DV) Package Abbreviation CM VS Taping Abbreviation (Quantity) E (3000 pcs/reel) E (3000 pcs/reel) Please consult the sales office for the above package availability. Outline and Article Indication * HD74LV1G125A Index band Marking L B CMPAK-5 = Control code REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 1 of 7 HD74LV1G125A Outline and Article Indication * HD74LV1G125A Marking L B VSON-5 = Control code Function Table Inputs OE L L H H : High level L : Low level X : Immaterial Z : High impedance A H L X Output Y H L Z Pin Arrangement OE 1 5 VCC A 2 GND 3 4 Y (Top view) REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 2 of 7 HD74LV1G125A Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to 7.0 -20 50 25 50 200 -65 to 150 Unit V V V mA mA mA mA mW C Test Conditions Output : H or L VCC : OFF or Output : Z VI < 0 VO < 0 or VO > VCC VO = 0 to VCC The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C. Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Min 1.65 0 0 0 -- -- -- -- -- -- -- -- 0 0 0 0 -40 Max 5.5 5.5 VCC 5.5 1 2 6 12 -1 -2 -6 -12 300 200 100 20 85 Unit V V V Conditions IOL Output current IOH mA Input transition rise or fall rate t / v ns / V Output : Z VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V Operating free-air temperature Note: Ta C Unused or floating inputs must be held high or low. REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 3 of 7 HD74LV1G125A Electrical Characteristic * Ta = -40 to 85C Item Symbol VCC (V) * 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.8 2.5 3.3 5.0 Min to Max 1.65 2.3 3.0 Output voltage 4.5 Min to Max 1.65 2.3 3.0 4.5 0 to 5.5 Min to Max 5.5 0 3.3 Min VCCx0.75 VCCx0.7 VCCx0.7 VCCx0.7 -- -- -- -- -- -- -- -- VCC-0.1 1.4 2.0 2.48 3.8 -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- 0.25 0.30 0.35 0.45 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.0 Max -- -- -- -- VCCx0.25 VCCx0.3 VCCx0.3 VCCx0.3 -- -- -- -- -- -- -- -- -- 0.1 0.3 0.4 0.44 0.55 1 5 10 5 -- V Unit Test condition VIH Input voltage VIL V Hysteresis voltage VH V VT+ - VT- VOH IOH = -50 A IOH = -1 mA IOH = -2 mA IOH = -6 mA IOH = -12 mA IOL = 50 A IOL = 1 mA IOL = 2 mA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND VO = 5.5 V or GND VIN = VCC or GND, IO = 0 VIN or VO = 0 to 5.5 V VIN = VCC or GND VOL Input current Off state output current Quiescent supply current Output leakage current Input capacitance Note: IIN IOZ ICC IOFF CIN A A A A pF For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 4 of 7 HD74LV1G125A Switching Characteristics * VCC = 1.8 0.15 V Item Propagation delay time Enable time Disable time Symbol tPLH tPHL tZH tZL tHZ tLZ Min -- -- -- -- -- -- Ta = 25C Typ 13.5 19.0 13.7 20.5 8.3 13.0 Ta = -40 to 85C Max 23.5 33.0 26.5 36.0 20.0 29.5 Min 1.0 1.0 1.0 1.0 1.0 1.0 Max 26.0 36.0 29.0 38.0 22.5 32.0 Unit ns ns ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A OE OE TO (Output) Y Y Y * VCC = 2.5 0.2 V Item Propagation delay time Enable time Disable time Symbol tPLH tPHL tZH tZL tHZ tLZ Min -- -- -- -- -- -- Ta = 25C Typ 6.8 8.7 7.0 8.8 5.1 7.3 Ta = -40 to 85C Max 13.0 16.5 13.0 16.5 14.7 18.2 Min 1.0 1.0 1.0 1.0 1.0 1.0 Max 15.5 18.5 15.5 18.5 17.0 20.5 Unit ns ns ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A OE OE TO (Output) Y Y Y * VCC = 3.3 0.3 V Item Propagation delay time Enable time Disable time Symbol tPLH tPHL tZH tZL tHZ tLZ Min -- -- -- -- -- -- Ta = 25C Typ 4.8 6.1 4.8 6.2 4.1 5.5 Ta = -40 to 85C Max 8.0 11.5 8.0 11.5 9.7 13.2 Min 1.0 1.0 1.0 1.0 1.0 1.0 Max 9.5 13.0 9.5 13.0 11.5 15.0 Unit ns ns ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A OE OE TO (Output) Y Y Y * VCC = 5.0 0.5 V Item Propagation delay time Enable time Disable time Symbol tPLH tPHL tZH tZL tHZ tLZ Min -- -- -- -- -- -- Ta = 25C Typ 3.4 4.3 3.4 4.4 3.2 4.0 Ta = -40 to 85C Max 5.5 7.5 5.1 7.1 6.8 8.8 Min 1.0 1.0 1.0 1.0 1.0 1.0 Max 6.5 8.5 6.0 8.0 8.0 10.0 Unit ns ns ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A OE OE TO (Output) Y Y Y Operating Characteristics * CL = 50 pF Item Power dissipation capacitance Symbol CPD VCC (V) 3.3 5.0 Min -- -- Ta = 25C Typ 10.5 11.5 Max -- -- Unit pF Test Conditions f = 10 MHz REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 5 of 7 HD74LV1G125A Test Circuit VCC VCC See Function Table Input Output 1 k S1 CL = 15 or 50 pF Pulse Generator Z OUT = 50 *1 OPEN See under table GND TEST t PLH / t PHL t ZH/ t HZ t ZL / t LZ Note: 1. C L includes probe and jig capacitance. S1 OPEN GND VCC Waveform * Waveforms - 1 tr 90 % 50% 10 % t PLH 90 % 50% 10 % t PHL tf VCC GND Input A VOH Output Y 50% 50% VOL * Waveforms - 2 90 % 50% tf tr 90 % 50% 10 % t ZL 10 % t LZ 50% t ZH t HZ 50% VOH - 0.3 V VCC GND VCC Input OE Waveform - A VOL + 0.3 V VOL VOH GND Waveform - B Notes: 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 3 ns, tf 3 ns. 2. Waveform - A is for an output with internal conditions such that the output is low except when disabled by the output control. 3. Waveform - B is for an output with internal conditions such that the output is high except when disabled by the output control. 4. The output are measured one at a time with one transition per measurement. REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 6 of 7 HD74LV1G125A Package Dimensions JEITA Package Code SC-88A RENESAS Code PTSP0005ZC-A Previous Code CMPAK-5 / CMPAK-5V MASS[Typ.] 0.006g D e A Q c E HE LP L A xM A S A b L1 A3 e Reference Symbol Dimension in Millimeters A2 A yS b b1 c c1 A1 S e1 A A1 A2 A3 b b1 c c1 D E e HE L L1 LP x y b2 e1 l1 Q Min 0.8 0 0.8 0.15 0.1 1.8 1.15 1.8 0.3 0.1 0.2 Nom 0.9 0.25 0.22 0.2 0.13 0.11 2.0 1.25 0.65 2.1 Max 1.1 0.1 1.0 0.3 0.15 2.2 1.35 2.4 0.7 0.5 0.6 0.05 0.05 0.35 0.9 l1 b2 A-A Section Pattern of terminal position areas 1.5 0.25 JEITA Package Code P-USON5-1.2x1.6-0.50 RENESAS Code PUSN0005KA-A Previous Code TNP-5D/TNP-5DV MASS[Typ.] 0.002g D 1.0 0.1 5 4 L1 HE E 1 3 c Reference Dimension in Millimeters Symbol ( 0.1 ) ( 0.1 ) e b D E A A1 A2 b b1 e Lp x y ZD c c1 HE L1 Min Nom Max 1.55 1.6 1.65 1.1 1.2 1.3 0.6 A 0.15 0.2 0.5 0.3 0.07 0.12 0.22 1.55 1.6 0.2 1.65 REJ03D0071-0700 Rev.7.00, Mar 21, 2008 Page 7 of 7 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2 |
Price & Availability of HD74LV1G125A08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |